SM Modellbau

SM Modellbau - TEK Micro Vario

SKU: 319984

Category: Jeti Duplex

HAN: 3200
HAN: 3200

54,90 €

incl. 19% VAT , plus

Available immediately
guter Lagerbestand

Lieferzeit: 1-2 Werktage

piece

Available immediately
guter Lagerbestand

Lieferzeit: 1-2 Werktage

The MicroVario realizes a high quality vario with a built-in high resolution pressure sensor via telemetry and also allows the use of compensation nozzles with the integrated TEK connection.

This results in a vario function that displays real rise and fall very accurately, independent of the billet thermics. For an exact height measurement even when operating with TEK nozzle a second pressure sensor is built in, which provides correct height data independent of the speed.

The built-in 3-axis acceleration sensor with a measuring range up to 16 g provides information about the loads in flight. Via our UniDisplay all measured values of the MicroVario can be viewed live.

All settings and alarms can of course also be conveniently programmed via the display. In accordance with the philosophy to support as many systems as possible, the MicroVario also refers to telemetry: Jeti Duplex Multiplex M-Link Graupner HoTT Futaba JR DMSS FrSky Spektrum (via Spektrum adapter) PowerBox Core.

The telemetry used in the MicroVario only has to be specified once in the settings. You can do this either using our PC program SM MicroVario Tool or the UniDisplay. HoTT is selected in the factory default setting.

And the MicroVario can do this:

high-resolution vario with TEK connection Height measurement with second pressure sensor with automatic zero setting after switching on
integrated 3 axis acceleration sensor up to +- 16 g
Full telemetry support for Jeti Duplex (EX), Multiplex M-Link, Graupner HoTT, Futaba FASSTest S.BUS2, JR DMSS, FrSky, Spektrum and PowerBox Core
Connector for receiver signal for remote control of certain functions
Measurement of the receiver battery voltage Current status is signalled via LED
Direct viewing of the measured values live with the UniDisplay
Parameter settings possible via PC, UniDisplay and telemetry
free firmware updates via PC with the USB interface (order no. 2550) or with already existing USB connection cables such as from Jeti, Multiplex or Graupner can be used almost everywhere due to its compact size and low weight

Technical data:

Dimensions: 26 (33 with plug) x 12 x 7mm
Weight: 1.8g without cable, 5.4g with 30cm standard cable
Vario Resolution: 0.01m/s
Vario noise: less than 0.02m/s
Resolution height measurement: 0,1m
Acceleration sensor: 3 axes up to 16g
Power supply: From receiver current (From 3.6V to 8.5V maximum)
Current consumption: approx. 2mA
Connections: 1 x connection for telemetry and power supply (link), 1 x servo pulse
input from receiver COM connection for UniDisplay and firmware update Connection for TEK nozzle