SM Modellbau

SM Model making - UniLog 2

SKU: 235090

Category: UniLog 2

HAN: 3000
HAN: 3000

Volle Unterstützung für die Telemetrie von Jeti Duplex, Multiplex M-Link, Graupner HoTT, Futaba und JR DMSS.

98,99 €

incl. 19% VAT , plus

Available immediately
geringer Lagerbestand

Lieferzeit: 1-2 Werktage

piece

Available immediately
geringer Lagerbestand

Lieferzeit: 1-2 Werktage

The UniLog 2 is the successor of our successful data logger UniLog. All known functions of the UniLog have been taken over and brought up to date with current technology. Numerous new functions have been added, so that practically no wishes remain open.

Telemetry über 2.4 GHz systems with Rückkanal is now an integral part of UniLog 2 and fully integrated. It supports the Jeti Duplex system, Multiplex M-Link and Graupner HoTT. The UniLog 2 recognizes the used telemetry system by itself, no configuration or special firmware is needed. Since an additional barometric (air pressure) height sensor with large resolution is integrated, a vario is also realized with the UniLog 2 in telemetry mode. Likewise, extensive alarms are programmable, which are reported by telemetry über the respective transmitter.

When operating with Multiplex M-Link, all data on the sensor bus are automatically logged by the UniLog 2 and also written to the memory card. One receives thus quite incidentally a MSB data logger.

A micro-SD memory card serves the UniLog 2 as a virtually unlimited memory. With up to 20 Hz recording rate and the micro SD memory card, almost any length of recordings with high detail resolution are possible. The data exchange with the PC for evaluation is very easy: Take the memory card out of the UniLog 2 and insert it with the included card reader into a USB port of the PC. The measured values of the UniLog 2 are available as text files on the memory card. The display and analysis of the data can be done with the well known software LogView or with GNU DataExplorer. By the internal real time clock with battery all measured values are always provided with date and time.

New is also the Möglichkeit of the single cell voltage measurement. A LiPo up to 6s can be connected directly with its balancer plug to the UniLog 2, the individual voltages are measured and recorded and of course also transmitted via telemetry üb.

Über our UniDisplay can be all measured values of the UniLog 2 also directly live viewed and the recorded data from the memory card read. Minimum and maximum values can be quickly retrieved and displayed from the stored recordings. All settings and alarms can of course also be conveniently programmed via UniDisplay.

Whether glider, aerobatic plane, helicopter, HLG or slowflyer, the UniLog 2 can be used due to its low weight and compact size in almost any area. Of course, the UniLog 2 is not only suitable for model flying. It can equally be installed in RC boats, RC cars, etc.

With the UniLog 2, you acquire a universal RC data logger and telemetry sensor that is powerful in all respects and exploits the possibilities of modern electronics to be a small helper and a great help in dealing with your RC models.

Features:

Complete measurement of electric drives with current, voltage, power, capacity, speed and temperature measurement (current, speed and temperature sensors are available separately in different variants)
micro SD memory card: almost unlimited recording and easy data readout
full telemetry support for Jeti Duplex, Multiplex M-Link and Graupner HoTT, including barometric vario
Internal real-time clock (with battery for at least 10 years): all measurements are provided with real time stamp, i.e. date and time
Memory rates from 1 measurement per second (1 Hz) to 20 measurements per second (20 Hz)
all sensors of the UniLog können be further used
Balancer connection für LiPo single cell measurement up to 6s
Höhen measurement with automatic zeroing after power on
Current measurement range depending on the connected sensor up to 400 A, voltage up to 60 V
Current and voltage transducer pluggable (thereby in operation as a pure Höhenmesser / Vario e.g. in gliders very small and lightweight)
Connection for receiver signal (Rx) and signal output to the controller (ESC) universal connections for external speed sensor and up to three temperature sensors
Temperature measurement also with PT1000 sensors for an extended measuring range
Connection für speed sensor (order no. 2560) for measurement of airspeeds
Direct connection to GPS logger possible for data recording in a file Recording of all data on the Multiplex sensor bus when operating with M-Link
Recording of receiver battery voltage
Power supply automatically by receiver and/or drive battery
Manual recording start via built-in button
start of recording adjustable by various conditions
current status is signaled über three LEDs
direct viewing of measured values live or recorded with our UniDisplay
Parameter settings über PC, UniDisplay and telemetry möglich
Supported by LogView software www.logview.info LogView is a very comprehensive and yet easy to use evaluation program for the PC that supports a variety of different measuring and loading devices from the modeling field.
simple and clear evaluation of the measurement results with the help of diagrams on the PC
because of its compact size and low weight, it can be used almost anywhere