Multiplex - Safety Power Switch Pro

SKU: 341319

Category: other

HAN: 1-01748
GTIN: 4059818017485
HAN: 1-01748

49,40 €

incl. 19% VAT , plus

Available immediately
geringer Lagerbestand

Lieferzeit: 1-2 Werktage

piece

Available immediately
geringer Lagerbestand

Lieferzeit: 1-2 Werktage

The motto in the development of the Safety Switch PRO was keep it simple. No PC or other tools are needed: Buy, install, fly, done. The power supply was kept as compact as possible, so that it also finds its place, for example: in gliders. Nevertheless, it was important to us to give the Safety Switch Pro a noble design.

We have achieved this with the help of the aluminum housing, which also ensures very good heat dissipation. As a switching element, you can choose the right one for you and your application from our two safety switches. (#1-01784 Safety switch Magnetic / #85195 Safety switch Micro) The scope of delivery includes an additional pluggable LED cable with a 3mm flat head LED to indicate the switching status. The Safety Switches are rated for a continuous current of 15A and 30A peak.

Since the receiver connection cable is the limiting factor here, the Twinbatt version is also available with an M6 high current plug connection. Here, the continuous current carrying capacity is 35A and the permissible peak is 60A. The Safety Switch PRO is an extremely reliable and safe power supply for your model. Trust in our years of experience.

Features:

High voltage power supply (input voltage = output voltage)SMD technology, low wear, vibration resistant
High-quality gold-plated connector systems and large cable cross-sections
High continuous current capability due to large-area cooling via the milled aluminum housing
Low power dissipation due to "ideal" diodes simulated by FET.
Secure battery connection through MPX M6 connector and safety clips
Compact construction and noble design
Two receiver connection cables for double wire cross-section and double number of contacts with SAFETY-SWITCH PRO
MPX M6 high current connector on SAFETY-SWITCH PRO TwinBatt (M6) for direct connection to MULTIPLEX receivers RX-9/12/16-DR pro M-LINK or other receivers established on the market with M6 input.
Integrated battery backer with SAFETY-SWITCH PRO TwinBatt . The batteries are discharged equally at the same voltage level.
In case of failure of one battery, the second battery takes over the receiver power supply alone.
Switch connector socket for free choice of your MPX switch.
(Magnetic safety switch / Micro safety switch)
LED status indicator on the housing
Additional pluggable LED- cable with a 3mm flat head LED to indicate the switch status.

Technical Data:

Recommended cell count: 5x NiXX or 2S LiPo/LiIo/LiFe, 9V maximum
Allowable current: 15A
Peak: 30A
Quiescent current consumption: 0.1A
Receiver connection: 2x 0,5mm² Uni JR socket with 200mm cable
Battery connection: MPX Multiplex plug M6
Dimensions: approx. 45 x 23x x18mm
Weight with cable: approx. 32g

Scope of supply:

SAFETY SWITCH PRO
LED cable 30cm
4 mounting screws
Manual

Manufacturer information:

MUTIPLEX Modellsport GmbH & Co. KG
Westliche Gewerbestr. 1
Baden-Württemberg
Bretten, Deutschland, 75015
info@shop.multiplex-rc.de
https://shop.multiplex-rc.de