Multiplex - LiPo-Akku ROXXY HV 2S 300mAh - 80C

SKU: 343841

Category: battery finder

HAN: 1-02489
GTIN: 4059818024896
HAN: 1-02489

12,06 €

incl. 19% VAT , plus

Available immediately
geringer Lagerbestand

Lieferzeit: 1-2 Werktage

piece

Available immediately
geringer Lagerbestand

Lieferzeit: 1-2 Werktage

With the new ROXXY Indoor HV Lipo series you get more out of your drive ! Due to the higher nominal voltage of 3.8V (Roxxy EVO Lipo 3.7V) and a charge end voltage of 4.35V per cell (ROXXY EVO Lipo 4.2V) you have noticeably more power.

All indoor drives recommended by us are compatible with the new HV series without restrictions. Since we didn't want to limit the small power packs in any way, we equipped them with an XT30 connector instead of our usual red BEC socket. Don't worry about handling, every current charger has a LiHv program or at least an adjustable charge end voltage range.

However, you can also charge the batteries to 4.2V with just the standard Lipo program, even then you will notice a difference.

Technical data:

Rated voltage: 3.8V/cell
Charge rate: 1...4 C. Small charge rates protect the battery, high charge rates reduce the number of cycles by about 10%
. End of charge voltage: 4.35 volts/cell (to be maintained to within 0.05 volts)
Important: the HV cells are 100% compatible with charging to 4.2V per cell.
Discharge rate / discharge current: HV series 80C ( 80 times the nominal voltage in Ah), briefly up to 160C for 3 sec.
Dimensions: 52 x 17 x 12mm
Weight: 20g
XH Balancer
XT30 plug