KST - 8mm Digital Servo HS-08 A horizontal

KST - 8mm Digital Servo HS-08 A horizontal

KST - 8mm Digital Servo HS-08 A horizontal

KST - 8mm Digital Servo HS-08 A horizontal

KST - 8mm Digital Servo HS-08 A horizontal

KST - 8mm Digital Servo HS-08 A horizontal

KST - 8mm Digital Servo HS-08 A horizontal

KST - 8mm Digital Servo HS-08 A horizontal

KST - 8mm Digital Servo HS-08 A horizontal

SKU: 319748

Category: servo finder

HAN: KST-1405
GTIN: 841918101454
HAN: KST-1405

HS-08 A F5J Flächenservo 0,5 N/m bei 6V für Thermik-Modelle bis 2,5 kg empfohlen.

55,90 €

incl. 19% VAT , plus

Currently out of stock

piece

Currently out of stock

The HS-08 A is an F5J wing servo with 0.5N/m at 6V, perfect for thermal models, and recommended for all models up to 2.5kg takeoff weight.

The servo was also inspired by the KST Glider Team Manager and tested by the KST Glider Team and some other pilots.

The HS08 is even more powerful than the X08 Plus. We recommend the HS08 Servo for thermal gliders up to 2,5kg takeoff weight as aileron, elevator and rudder servo.

Technical data:

dimensions: 24 x 8 x 25,25mm
torque at 3.8V: 2.8kg/cm
torque at 6.0V: 4.5kg/cm
torque at 8.4V: 5.2kg/cm
operating time at 3.8V: 0.21 sec/60 degrees
operating time at 6V: 0.13 sec/60 degrees
operating time at 8.4V: 0.11 sec/60 degrees
Voltage range: 3.8 to 8.4V
frequency: 1520us/333Hz, 1000-2000us
cable length: approx.
Weight: approx. 11g
Bearing: Dual ball bearing
motor: 7mm coreless
Driver type: FET
For horizontal installation

width:	7,0mm - 12,0mm
actuating force 6V:	0kg/cm - 2,2kg/cm
weight:	0,0g - 15,0g
actuating time 6v:	0,10 - 0,15 sec bei 60°

Manufacturer information:

AVN-Security GmbH
Warthweg 5a
Hessen
Groß-Umstadt, Deutschland, 64823
Info@kst-servos.com
https://www.kst-servo-shop.de

KST - 8mm Digital Servo HS-08 B vertical

KST - 8mm Digital Servo HS-08 B vertical

Available immediately
geringer Lagerbestand

Lieferzeit: 1-2 Werktage

55,90 € *

Krick - Federstahldraht 2,0 x 1000mm

Krick - Federstahldraht 2,0 x 1000mm

Available immediately
mehr als 10 lagernd!

Lieferzeit: 1-2 Werktage

1,90 € *

1,90 € per 1 m

3D Print Lab - Servo frame for KST HS-08 A

3D Print Lab - Servo frame for KST HS-08 A

Available immediately
guter Lagerbestand

Lieferzeit: 1-2 Werktage

1,90 € *

R&G - 5 minutes Epoxy - 200g

R&G - 5 minutes Epoxy - 200g

Available immediately
guter Lagerbestand

Lieferzeit: 1-2 Werktage

12,90 € *

6,45 € per 100 g

Kavan - 100x10cm Balsa 4 mm Standard

Kavan - 100x10cm Balsa 4 mm Standard

Available immediately
mehr als 10 lagernd!

Lieferzeit: 1-2 Werktage

2,90 € *

MP JET - Alu Gewindegabelkopf M2 (6 Stück)

MP JET - Alu Gewindegabelkopf M2 (6 Stück)

Available immediately
mehr als 10 lagernd!

Lieferzeit: 1-2 Werktage

9,90 € *

1,65 € per piece