KST - 10mm Digitalservo X10 Mini HV 5cm with servoframes

KST

KST - 10mm Digitalservo X10 Mini HV 5cm with servoframes

SKU: 279837

Category: servo finder

HAN: KST-0109
HAN: KST-0109

Das KST X10 Mini ist der kleine Bruder des KST10.

49,90 €

45,90 €

incl. 19% VAT , plus

Available immediately
guter Lagerbestand

Lieferzeit: 1-2 Werktage

piece

Available immediately
guter Lagerbestand

Lieferzeit: 1-2 Werktage

The KST X10 Mini is the 5mm shorter version of the KST X10 and thus has the dimensions of the KST DS135 MG. The X10 Mini is suitable for HV and has a torque of 6,8kg/cm at 7,4V and therefore more power like the DS225MG (5,6kg/cm at 7,4Volt).

As with the X10 Servo, the X10 Mini is equipped with a higher aluminium alloy on the upper part of the housing, which improves the backlash resistance in the long run. Please observe the servo recommendations of the respective model manufacturer when selecting your servos.

Included in delivery is a pair of servo frames made of PLA or PET for horizontal installation. The servo frame can be glued or screwed into the model. When screwing, make sure that the screw length is correct! The servo frames are mirrored and therefore perfectly suited for installation as ailerons or flaps, for example.

Technical data:

Dimensions: 30,0 x 10,0 x 30,0mm
Torque at 6.0V: 5.5kg/cm
Torque at 7.4V: 6.8kg/cm
Torque at 8.4V: 7.5kg/cm
Operating time at 6,0V: 0,13 sec/60°.
Operating time at 7.4V: 0.11sec/60°.
Operating time at 8.4V: 0.09sec/60°.
Voltage range: 6.0 to 8.4V
Weight: 23g
Bearing: Dual ball bearing
Engine: Coreless
Including 2x servo frame made of PLA or PET