Jeti

Jeti - S.BUS/PPM to PWM Converter CH1-4

SKU: 312887

Category: Jeti Duplex 2.4 GHz

Manufacturers: Jeti
GTIN: 4250320258940
HAN: 29854845

19,99 €

incl. 19% VAT , plus

Lager Lieferant

Lieferzeit: Must be ordered. Ready for shipment in 3-6 days after order.

piece

Lager Lieferant

Lieferzeit: Must be ordered. Ready for shipment in 3-6 days after order.

With the S.BUS/PPM->PWM Converter up to four servo channels can be controlled at one S.BUS/PPM output. This is ideal if the receiver actually required in a model with a very slim fuselage would not fit due to its size, and the slots of the next smaller receiver are to be extended.

The S.BUS/PPM->PWM converter is suitable for receivers that can output an S.BUS or PPM (negative) signal (e.g. all JETI REX receivers). The input signal is automatically detected and converted into PWM (servo signal). The servo signal is output with the control channels CH1-CH4 or CH5-CH8, depending on the variant.

If it is necessary to assign the servo channels of the model, this is done in the menu of the transmitter used. For connecting the S.BUS/PPM->PWM converter to the receiver we recommend the high quality Premium² patch cable.

Important notes:

Due to its compact and light weight design, the S.BUS/PPM->PWM Converter is only approved for servos up to 1.5 Amps per output.
Power servos and main control functions with high current consumption must not be operated on the converter.
Do not operate on the CentralBox 200 and 400 (or their connected receivers); the outputs of this CentralBox 200/400 are not designed to supply several servos.
At the CentralBox 210/220 observe the maximum current load of a slot E2/15. Only operate secondary functions.

Technical data: