Graupner

Graupner - Receiver Gyro Falcon 12 HoTT

SKU: 270890

Category: Graupner HoTT

HAN: S1035
GTIN: 8809403496722
HAN: S1035

89,00 €

incl. 19% VAT , plus

Lager Lieferant

Lieferzeit: Must be ordered. Ready for shipment in 3-6 days after order.

piece

Lager Lieferant

Lieferzeit: Must be ordered. Ready for shipment in 3-6 days after order.

With the Falcon 12 Graupner presents its new powerful 6-channel receiver. Integrated are a 3-axis gyro and a 3-axis acceleration sensor (A-meter). The receiver transmits the receiver voltage and temperature as well as the signal strength without additional sensors.

Just like its namesake, the falcon, the Falcon 12 embodies determination, power and precision. Go on the hunt for the perfect flight with the Falcon.

The new antenna amplifier provides a higher range despite the single antenna. The faster 32-bit L4 processor is a guarantee for power-saving operation and the higher performance ensures that the Falcon 12 can also be used as a flybarless system for helicopters and as a flight controller for copters. Of course the integrated Falcon gyro system can also be used perfectly for wing models. There are different gyro modes: OFF, normal stabilization, heading lock and turn rate mode which provides for particularly easy knife flight and easy torquing and supports the pilot.

The Falcon 12 is therefore the all-rounder among the 6-channel receivers.

3-axis gyro + 3-axis accelerometers:

Extremely fast, easy and comfortable adjustable via hot transmitter
Telemetry Menu
Surface models:
Stabilization of the flight model in difficult wind conditions for up to 3 axes
Natural flight behaviour due to proportional gyroscope suppression
Due to the 3-axis gyroscope, even difficult to control aerobatic models can be flown very well and aerobatics are extremely simplified
Flight figures can be flown much cleaner
3 different gyro modes: OFF, normal stabilization, heading lock and turn rate mode for easy knife flight and easy torquing
Easy setting of the gyro assignment
Setting the parameters via HoTT telemetry
Flybar reading system for helicopters
Basic setting completed in a few minutes
Fast and innovative axle assignment, thus flexible installation direction
Extremely space-saving due to size, weight and omission of cables, therefore easy to store
Especially vibration insensitive 3 axis sensors of the latest generation
Pirouette optimization of the swashplate and direction of the tail torque compensation are detected automatically
All common helicopter swashplates 90/120/135/140 degrees Adjustable swashplate rotation up to 90 degrees for multi-blade heads
Clearly arranged standard and, if required, selectable expert menu
Sensitivity Parameters during flight can be adjusted to speed and style, also depending on flight phase via encoder
Super fast by eliminating the transmission time from the receiver to the flybarless system
Very direct steering feel
Telemetry support of own Hott Sensors and Hott Sensors of other suppliers
SUMD output for other flybarless receivers
Voltage input for external voltage divider, e.g. already included in controllers S3082 and S3083
HV suitable.
Input voltage range 3.6...12.6 V
Can be programmed and operated with all previously available HoTT transmitters with telemetry

Flybarless for helicopters:

Easy programming of basic settings via telemetry.
The pirouette optimization is automatically determined from the parameters and works extremely well.
Extreme flight stability with full 3D capability even with the basic settings.
Effect for tail and swashplate easily adjustable via the telemetry menu or via selectable sensors.
Further optimization possibilities in expert mode for the personal flight style and personal needs.
Extremely simple adjustment of the basic settings via telemetry: Rotor rotation direction
Swashplate type
Swashplate frequency 50...200 Hz
Swash plate direction
Swashplates Servo centers Servo 1...3
Set swashplate cyclical travel to 8
Swashplates Pitch travel A/B
Swashplate limit
Swashplate rotation
Tail servo center pulse 760µs, 960µs, 1.5 ms
Tail servo frequency 50...333 Hz
Tail servo center position
Expo yes/no
Logging for service purposes
Expert mode yes/no
Simple gyro axis assignment
Gyro action for tail and swashplate via telemetry or adjustable transducers
Additional parameters can be set in expert mode