With Graupner HoTT 2.4GHz technology, the 9-channel receiver has a new Hopping Telemetry Transmission high-frequency section with the latest components and state-of-the-art software.
A hardware antenna diversity for optimal reception. Without additional sensors the parameters receiver voltage and temperature and signal strength are transmitted. With this receiver it is possible for the first time to control a multi-copter without using an external flight control. The associated elimination of additional electronics and cables saves weight and allows the remaining components to be mounted in a tidy manner. The integrated Flight Control is completely configurable via HoTT telemetry, which makes the adjustment much easier.
The system implements the control commands very exactly and precisely, which quickly gives you a familiar flight feeling, especially in FPV racing. Via channel 5 you can switch between 2 flight modes. This allows you to switch to the self-neutralizing attitude mode, which limits the pitch to about 50 degrees, or to the rotation rate mode (also called acro mode). Here there is no angle limitation any more and can be controlled freely via each axis, just like in a model helicopter.
With the simple controller teach-in function, teaching the controller paths is child's play. Once activated, all ESCs can be directly controlled and taught-in simultaneously with the throttle stick. Maximum performance and stability can be achieved by adjusting the roll sensitivity factor to the pitch sensitivity of asymmetrical multiheads. Likewise, the gyro effect can be adjusted gas-dependently in order to still achieve high sensitivity with strong drives. The following multicopter types are supported: Quadro X, Quadro +, Hexa V, Hexa I, Tri L, Tri R This gyro receiver is used exclusively for controlling multicopters. The GR-18 (33579) is intended for use as a Fly - barless system or wing gyro.
Technical data:
- Dimensions: 46 x 21 x 14mm
- Weight: 14g
- Operating voltage: 3.6 to 8.4V
- Reichwiete: 4000m
- antenna length: 2x 145mm