AGF-RC

AGF-RC - A80BHX-H Servo

SKU: 359859

Category: servo finder

HAN: A80BHX-H
HAN: A80BHX-H

94,90 €

incl. 19% VAT , plus

Available immediately
geringer Lagerbestand

Lieferzeit: 1-2 Werktage

piece

Available immediately
geringer Lagerbestand

Lieferzeit: 1-2 Werktage

The AGF-RC A80BHX-H is a brushless swashplate servo with a full aluminum housing. The servo is HV capable and can be powered directly from a 2s LiPo (4.8 - 8.4V). With the AGF SP V3 interface, the servo can be converted from 1520us to 760us! (Narrow Band)

With 30kg*cm torque and an extremely fast actuation time of 0.038s / 60° at a possible actuation frequency of up to 333Hz, the servo is perfectly made for hard use on the swashplate of high-end helicopters. The 3 ball bearings ensure that even in the toughest use everything runs smoothly and perfectly. The A80BHX-H is optimized for operation with modern FBL systems and to enable the best possible performance in hard 3D.

The A80BHX-H is also programmable with the optional USB Inteface AGF-SP V3.

This requires a Windows computer running Windows 7 or 10. The servos are powered directly through the USB port and only need to be plugged into the interface. In the software, for example, the soft start, the neutral point, the servo travels can be adjusted (larger and smaller) or the direction of rotation can be set. Furthermore, if needed, the Sanwa SSR mode can be activated which is especially interesting for RC car drivers. Also the integrated overload cutoff can be adjusted in 3 steps and selected what should happen in case of signal loss.

Of course these are optional features, all servos can be operated directly out of the box normally and do not need to be adjusted beforehand!

Technical data: